Frequently Asked Questions

Yes, the InnerVision™ Transillumination System is very easy to put together. There are two components to this device: the Fiber Optic Cable and the Detachable Tip. Simply attach the tip to the end of the cable and plug the cable into the compatible light source.

No, the InnerVision™ Fiber Optic Cable and the InnerVision™ Detachable Tips are latex-free.

No, the Fiber Optic Cable does not have an expiration date. The Fiber Optic Cable does have a limited one-year warranty.

The InnerVision™ Fiber Optic Cable can be connected to any major light source. Please consult our Light Source Compatibility Chart for a complete list.

When the distal end of the Fiber Optic Cable becomes dark and spotted, it is time to replace your cable. Consult the Directions for Use.

The holes enhance the radial illumination of the tip.

The tips are available in 40 FR blunt (Hurst), 50 FR tapered (Maloney), and 56 FR tapered (Maloney).

No, the Detachable Tips are for single use only.

The Detachable Tips are sold sterile and ready to use. They are for single use only and must be discarded after the procedure.

You may clean the Fiber Optic Cable with a pre-steam autoclave, the STERIS® or the STERRAD® system. Use the "STERRAD® 100 System Operator's Manual" when sterilizing the fiber optic cable with a STERRAD® System. Do not use synthetic detergents or oil bases soaps as they can damage the Fiber Optic Cable.

STERRAD® is a registered trademark of Advanced Sterilization Products.

No, do not soak the Fiber Optic Cable in any disinfectants as the material will absorb the chemicals.

The InnerVision™ Transillumination System can be used in anti-reflux procedures, colon reconstruction procedures, esophageal cancer procedures, and obesity procedures.

While a laparoscope provides some light when performing surgical procedures, the InnerVision™ Transillumination System has an added advantage as it lights organs radially. The surgeon is able to locate the tip of the InnerVision™ easily during procedures.

The InnerVision™ is simple and easy to use. All instructions can be found in the Directions for Use in the product packaging.

No, you cannot re-use the cable if it is discolored or cracked. The cable must be replaced with a new one.

The InnerVision™ Fiber Optic Cable should be stored in a cool, dry place in temperatures not exceeding 25 degrees Celsius (77 degrees Fahrenheit). The Fiber Optic Cable cannot not be hung or coiled tightly as it could result in damage to the fiber optics.

Incorrect use can lead to thermal injury of the patient or of the user. Consult the Directions for Use for detailed instructions on proper technique.

Yes, please call us at 800-558-6408 to request a sample. Samples are not for clinical use and must be returned after viewing.